Cisco 8851, Administration Manual

Page: 89 / 310

The Language Selection parameter defaults to blank; the maximum number of characters is 512. For example:
<Language_Selection ua=
”
na
”
> Spanish
</Language_Selection>
During startup, the phone checks the selected language and downloads the dictionary from the TFTP/ HTTP
provisioning server that the phone configuration indicates. The dictionaries are available at the support website.
Procedure
Step 1
Press
Applications
.
Step 2 Select Device administration .
Step 3 Scroll to
Language
.
Step 4 Select the desired language , then press Set .
Dictionary Server Script
The Dictionary Server Script defines the location of the dictionary server, the available languages, and the
associated dictionary. The script recognizes up to 19 language entries. The syntax is:
Dictionary_Server_Script
serv=tftp://192.168.1.119/
;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml
TFTP, HTTP, and HTTPS support exists for the dictionary download.
Note
Default to blank; the maximum number of characters is 512. The detailed format is as follows:
serv={server ip port and root path};
d0=language0;x0=dictionary0 filename;
d1=language1;x1=dictionary1 filename;
d2=language2;x2=dictionary2 filename;
d3=language3;x3=dictionary3 filename;
d4=language4;x4=dictionary4 filename;
d5=language5;x5=dictionary5 filename;
d6=language6;x6=dictionary6 filename;
d7=language7;;x7=dictionary7 filename;
d8=language8;x8=dictionary8 filename;
d9=language9;x9=dictionary9 filename;
The following languages locales are supported on the Cisco IP Phone:
• None: English-US
• bg-BG: Bulgarian
• zh-HK: Chinese Hong Kong
• zh-CN: Chinese Simplified
• cs-CZ: Czech
• da-DK: Danish
• fi-FI: Finnish
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
73
Regional Parameters and Supplementary Services