Cisco 8851, Administration Manual

Page: 85 / 310

Examples for the Interdigit Short Timer
To set the timer for the entire dial plan:
S:6, (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
S:6 means that while the user enters a number with the phone off hook, the user can pause for up to 15 seconds
between digits before the Interdigit Short Timer expires. This setting is especially helpful to users such as
sales people, who are reading the numbers from business cards and other printed materials while dialing.
Set an instant timer for a particular sequence within the dial plan:
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxxS0 | 9,8,011xx. | 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0 means that with the timer set to 0, the call is transmitted automatically when the user
dials the final digit in the sequence.
Edit the Dial Plan on the IP Phone
Procedure
Step 1 In the phone web user interface, navigate to Admin Login > advanced > Voice > Ext(n) , where n is an
extension number.
Step 2 Scroll to the
Dial Plan
section.
Step 3 Enter the digit sequences in the Dial Plan field.
The default (US-based) systemwide dial plan appears automatically in the field.
Step 4 You can delete digit sequences, add digit sequences, or replace the entire dial plan with a new dial plan.
Separate each digit sequence with a pipe character, and enclose the entire set of digit sequences within
parentheses. Example:
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
Step 5 Click
Submit All Changes
.
The phone reboots.
Step 6 Verify that you can successfully complete a call with each digit sequence that you entered in the dial plan.
If you hear a reorder (fast busy) tone, review your entries and modify the dial plan appropriately.
Note
Reset the Control Timers
If you need to edit a timer setting only for a particular digit sequence or type of call, you can edit the dial plan.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
69
Dial Plan