Cisco 8851, Administration Manual

Page: 241 / 310

Description Parameter
Maximum value of the exponential delay. The maximum value to cap
the exponential backoff retry delay (which starts at the Register Retry
Intvl and doubles every retry). Defaults to 0, which disables the
exponential backoff (that is, the error retry interval is always at the
Register Retry Intvl). When this feature is enabled, the Reg Retry
Random Delay is added to the exponential backoff delay value. The
range is from 0 to 2147483647.
Default: 0
Reg Retry Intvl Cap
Sets the lower limit of the REGISTER expires value returned from the
Proxy server. Sub Min Expires
Sets the upper limit of the REGISTER minexpires value returned from
the Proxy server in the Min-Expires header.
Default: 7200.
Sub Max Expires
This value (in seconds) determines the retry interval when the last
Subscribe request fails.
Default: 10.
Sub Retry Intvl
The phone can use a RETRY-AFTER value when it is received from a SIP proxy server that is too busy
to process a request (503 Service Unavailable message). If the response message includes a RETRY-AFTER
header, the phone waits for the specified length of time before to REGISTER again. If a RETRY-AFTER
header is not present, the phone waits for the value specified in the Reg Retry Interval or the Reg Retry
Long Interval. Note
Response Status Code Handling
Description Parameter
This parameter may be set to invoke failover upon receiving specified
response codes.
Default: Blank
For example, you can enter numeric values 500 or a combination of
numeric values plus wild cards if multiple values are possible. For the
later, you can use 5?? to represent all SIP Response messages within
the 500 range. If you want to use multiple ranges, you can add a comma
"," to delimit values of 5?? and 6??
Try Backup RSC
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
225
Cisco IP Phone Web Page