Cisco 8851, Administration Manual

Page: 125 / 310

The following figure shows how you attach the phone to the wall bracket.
Figure 8: Attach Phone to Wall Bracket
Step 5
Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into
position.
Step 6 Proceed to Adjust the Handset Rest, on page 116 .
Remove the Phone from the Non-Lockable Wall Mount
The wall bracket has two tabs that lock the kit together. Use the following illustration to locate the tabs.
Figure 9: Tab Location
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
109
Non-Lockable Wall Mount Components