Cisco 8841 User Manual Download

Page: 77 / 93

Wired Headsets

Cisco IP Phone 8841/8851 Multiplatform Phones User Guide

USB Headsets

You can use a USB headset for your calls if your phone has a USB port.

If your phone has more than one USB port, only one USB headset can be connected at a time.

For a list of supported headsets, see

Unified Communications Endpoint and Client

Accessories

. USB headsets that are not listed may not function properly if you attach them to

the USB port. For more information, see the documentation from your USB headset
manufacturer.

Connect a USB Headset

When you use USB headsets with your phone, keep in mind:

•

You can use only one headset at a time. The most-recently connected headset
is the active headset.

•

If you are on an active call and unplug a USB headset, the audio path does not
change automatically. You need to press the

Speakerphone

button or pick up

the handset.

•

If you are on an active call and unplug a USB headset, the audio changes
automatically to the speaker.

•

If you are on an active call and plug in a USB headset, the audio changes to the
USB headset.

Use the step below to connect a USB headset.

Plug the USB headset plug into the USB port on the phone.

Summary of Contents for 8841






























































































Search results

Summary of Contents for 8841

Reviews:

Related manuals for 8841

Brands by name

Popular brands

Cisco 8841, User Manual

Search results

Summary of Contents for 8841

Reviews:

Related manuals for 8841

Brands by name

Popular brands