background image

 

Accessories 

Cisco IP Phone 8841/8851 Multiplatform Phones User Guide 

64 

Upgrade the Headset 500 Series Firmware 

When you connect the headset to the phone, the phone checks the headset firmware version. If 
a new version is available, the phone prompts you to upgrade your headset. The headset 
upgrade prompt displays only when you are on the home screen of the idle phone. If the phone 
is in use when a new version firmware is detected the upgrade prompt displays when you return 
to the home screen in idle mode. 

 

If you don't respond to the upgrade prompt, the upgrade automatically starts when the 
countdown ends. (

Note

: Your administrator configures the upgrade rule for your headset on the 

phone administration web page.) 

Use the step below to upgrade the headset 500 series firmware. 

1.

 

Press 

Upgrade 

on the phone when prompted. 

The upgrade icon 

 on the upper-right corner of the phone screen indicates that the headset is 

upgrading. The time that the upgrade process takes varies with headset models, from 10 to 15 
minutes. 

2.

 

(Optional) If you want to upgrade your headset later, press 

Postpone

. (

Note

: You 

will be prompted every 2 hours until you start the upgrade.) 

Cisco Headset 500 Series Setup 

On the phone screen, you can test your headset, customize your bass and treble, gain or 
microphone volume, and sidetone or feedback settings when: 

 

The Cisco Headset 520 Series is connected to the phone with the inline USB 
controller. 

 

The Cisco Headset 531 and 532 is connected to the phone with the USB 
adapter. 

 

The Cisco Headset 560 Series Standard Base or Multibase is connected to the 
phone with the Y-cable or the USB cable. 

You are prompted to set up your headset when you connect it to the phone. If you ignore the 
headset setup prompt, you can also access it from 

Applications 

 > 

Status 

Accessories

 

Note

: The settings are stored in the inline USB controller, the USB 

adapter, or the headset base, varying from headset models. A factory 
reset on the phone does not affect the headset settings. 

 

 

 

Summary of Contents for 8841






























































































Reviews: