Cisco 8800 Series, Manual

Page: 423 / 544

Description Parameter
Short timeout between entering digits when dialing.
The Interdigit_Short_Timer is used after any one digit,
if at least one matching sequence is complete as
dialed, but more dialed digits would match other as
yet incomplete sequences.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Interdigit_Short_Timer
ua="na">3</Interdigit_Short_Timer>
• In the phone web page, set a value in seconds
ranges from 0-64 seconds.
Allowed values: 0–64 seconds
Default: 3
Interdigit Short Timer
Localize Your Cisco IP Phone
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104 .
Procedure
Step 1 Select Voice > Regional .
Step 2
Configure the values in the fields in the Time and Language sections.
Step 3
Click Submit All Changes .
Configure Time and Date on Phone Web Page
You can manually set the time and date on the phone web page.
Before you begin
Access the Phone Web Interface, on page 104 . Review Time and Date Settings, on page 404 .
Procedure
Step 1 Select Voice > Regional .
Step 2
In the Time section, enter the time and date information.
Step 3 Select
Voice
>
User
.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
403
Cisco IP Phone Installation
Localize Your Cisco IP Phone