Cisco 8800 Series, Manual

Page: 368 / 544

Description Parameter
Supports the content-encoding gzip feature.
If gzip is selected, the SIP message header contains the string
“Accept-Encoding: gzip”, and the phone is able to process the SIP
message body, which is encoded with the gzip format.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Sip_Accept_Encoding ua="na">none</Sip_Accept_Encoding>
• In the phone web page, enter an appropriate MIME type for a
SIPINFO message.
Allowed values: none and gzip
Default: none
Sip Accept Encoding
Sets if the phone uses IPv4 or IPv6.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<SIP_IP_Preference ua="na">IPv4</SIP_IP_Preference>
• In the phone web page, select IPv4 or IPv6.
Allowed values: IPv4/IPv6
Default: IPv4.
SIP IP Preference
Controls the display name in “Directory”, “Call History”, and in the
“To” header during an outgoing call.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Disable_Local_Name_To_Header
ua="na">No</Disable_Local_Name_To_Header>
• In the phone web page, select
Yes
to disable the display name.
Allowed values: Yes/No
Default: No
Disable Local Name To Header
Configure the SIP Timer Values
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104 .
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
348
Cisco IP Phone Installation
Configure the SIP Timer Values