Home
/
Cisco
/
7965G - Unified IP Phone VoIP
/
Software Manual

Cisco 7965G - Unified IP Phone VoIP, Software Manual, Page: 160 / 302

Share

Page: 160 / 302

Cisco 7965G - Unified IP Phone VoIP Software Manual Download Page 160

Configuration reference

Description

Feature

For more information, see:

•

Cisco Unified Communications
Manager Administration Guide

,

“

Cisco

Unified IP Phone Configuration

”

chapter

•

Cisco Unified Communications
Manager System Guide

,

“

Cisco Unified

IP Phones

”

chapter

•

Cisco Unified Communications
Manager Features and Services Guide

,

“

Barge and Privacy

”

chapter

Prevents users who share a line from adding themselves
to a call and from viewing information on their phone
screens about the call of the other user.

Privacy

For more information, see:

•

Cisco Unified Communications
Manager System Guide

,

“

Cisco Unified

IP Phone

”

chapter

•

Cisco Unified Communications
Manager Administration Guide

,

“

Phone

Button Template Configuration

”

chapter

The administrator can assign features to line buttons.
Softkeys normally control these features; for example,
New Call, Call Back, End Call, and Forward All. When
the administrator configures these features on the line
buttons, they always remain visible, so users can have a

“

hard

”

New Call key.

Programmable Line Keys

For more information about security, see

Supported Security Features, on page 15

.

For additional information, see the

Cisco

Unified Communications Manager Security
Guide

,

“

Configuring a Phone Security Profile

”

chapter.

Provides a secure (encrypted) connection between two
phones. A security tone is played at the beginning of the
call to indicate that both phones are protected. Some
features, such as conference calling, shared lines,
Extension Mobility, and Join Across Lines are not
available when protected calling is configured. Protected
calls are not authenticated.

Protected Calling

For more information, see:

•

Cisco Unified Communications
Manager System Guide

,

“

Cisco Unified

IP Phones

”

chapter

•

Cisco Unified Communications
Manager Features and Services Guide

,

“

Quality Report Tool

”

chapter

Allows users to use the QRT softkey on a phone to submit
information about problem phone calls. QRT can be
configured for either of two user modes, depending upon
the amount of user interaction desired with QRT.

Quality Reporting Tool
(QRT)

No configuration required.

Allows users to call the most recently dialed phone
number by pressing a softkey.

Redial

Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

140

Features, Templates, Services, and Users

Telephony Features Available for Cisco Unified IP Phone

«
...
158
159
160
161
162
...
»

Summary of Contents for 7965G - Unified IP Phone VoIP















































































































































































































































































































Reviews:

No comments