Cisco 7920 Series User Manual Download

Page: 85 / 134

Changing Phone Settings

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager

FCS REVIEW DRAFT - CISCO CONFIDENTIAL

Tips

•

You cannot modify the Ring Settings for the wireless IP phone from the User Options web pages.

•

To return to the Settings menu, press

Back

after saving the change or press

to return to the

main screen.

Customizing Volume Settings

You can adjust the ring and speaker volume settings for your phone.

Change the way the phone
rings

Choose

> Sound Settings > Alert Pattern

Select one of the following:

•

Ring Only

•

Vibrate Only

•

Silent

•

Vibrate, Then Ring

•

Vibrate And Ring

The

icon appears next to your selection.

Press

Save

to make the change, or

Cancel

Note

This change applies only to the handset and

not

the desktop

charger.

If you want to...

Then...

Adjust the ring volume level

Choose

> Phone Settings > Sound Settings > Volumes

Select

Ring.

Note

To make a ring selection, press the number key for the item, the

button, or the

Change

softkey.

Press to increase the volume or to decrease the volume and
hear a sample ring volume.

Press

Save

to make the change or

Cancel

Adjust the speaker volume
level

Choose

> Phone Settings > Sound Settings> Volumes.

Select

Speaker

Press to increase the volume or to decrease the volume.

Press

Save

to make the change or

Cancel

If you want to...

Then...

Summary of Contents for 7920 Series







































































































































Search results

Summary of Contents for 7920 Series

Reviews:

Related manuals for 7920 Series

Brands by name

Popular brands

Cisco 7920 Series, User Manual

Search results

Summary of Contents for 7920 Series

Reviews:

Related manuals for 7920 Series

Brands by name

Popular brands