Cisco 7920 Series User Manual Download

Page: 79 / 134

Using a Handset, Headset, and Speakerphone

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager

FCS REVIEW DRAFT - CISCO CONFIDENTIAL

Using a Handset, Headset, and Speakerphone

You can use your phone as a mobile handset, a speakerphone, or with a headset (wired or Bluetooth
wireless).

If you want to...

Then...

Use the handset

Press

; to hang up, press

Use a wired headset

Lift the headset port cover

and plug the headset connector into



the headset port. The

icon appears on the phone status line.

Place and answer calls as usual.

If you use AutoAnswer, see

Using AutoAnswer, page 73

for

exceptions.

You can use the headset with all the controls on your phone,
including

and

The headset audio remains active when the headset is connected to
the phone.

Use a Bluetooth wireless
headset

Enable the Bluetooth setting on your phone.

Scan for a list of Bluetooth devices.

Select and pair the Bluetooth headset with the phone.

For more information, see

Using Bluetooth Wireless Headsets,

page 70

Use the speaker mode

Press and hold

until the

icon appears.

Note

You can activate the speakerphone before making a call or
during a call. The speaker mode remains active for future calls
until toggled off.

Note

You can activate the speakerphone (on the phone) even when the
phone is docked in the desktop charger and connected to a wired
headset.

Summary of Contents for 7920 Series







































































































































Search results

Summary of Contents for 7920 Series

Reviews:

Related manuals for 7920 Series

Brands by name

Popular brands

Cisco 7920 Series, User Manual

Search results

Summary of Contents for 7920 Series

Reviews:

Related manuals for 7920 Series

Brands by name

Popular brands