Cisco 7920 Series, User Manual

Page: 103 / 134

Accessing Voice Messages
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Accessing Voice Messages
When the phone displays “You Have VoiceMail” or has a red blinking light, you can access your
messages from your phone.
Note Your company determines the voice message service that your phone system uses. For the most
accurate and detailed information, refer to the documentation that came with your voice
message service.
If you want to... Then...
Set up and personalize
your voice message
service 1. Press Message or press and hold .
2.
Follow the voice instructions.
Note If you changed the left softkey on the main screen to access the Phone
Book (
Ph Book) , the Message softkey is not available. For more
information, see Customizing the Phone Screen, page 76 .
Check for your new voice
messages Look at your phone for these indicators:
•
A red blinking light
• A text message, “You Have VoiceMail”
•
A flashing message waiting icon next to your directory number
in Line View.
Listen to your voice
messages or access the
voice message system
menu
1.
Press Message or press and hold .
2.
Enter your voice message password.
3. Follow the voice instructions to listen to your messages.
Note If you changed the left softkey on the main screen to access the Phone
Book (
Ph Book) , the Message softkey is not available. For more
information, see Customizing the Phone Screen, page 76 .
Send a call to your voice
message system Press iDivert .
The iDivert feature automatically transfers a call (including a ringing or
held call) to your voice message system. Callers hear your voice message
greeting and can leave you a message.