Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 109 / 208

4-33
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Configuring TFTP Options
Using the Phone’s Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Procedure
Step 1
Display the Network Configuration menu.
For instructions, see the “Displaying the Network Configuration Menu” section
on page 4-5 .
Step 2
Unlock Network Configuration menu options.
For instructions, see the “Unlocking and Locking Options on the Network
Configuration Menu” section on page 4-6 .
Step 3
Scroll to TFTP Server 1 .
Step 4 Press the Edit softkey.
Step 5
Enter a new TFTP server address.
For information about entering values, see the “Guidelines for Editing Settings in
the Network Configuration Menu” section on page 4-7 .
Step 6
Press Validat .
Step 7 Scroll to TFTP Server 2 to add a backup TFTP server.
Step 8
Press Save .
Enabling an Alternate TFTP Server
If you are using DHCP, but you want to override the TFTP address that the phone
received through DHCP, enable an alternate TFTP Server.