3-52
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-14
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
1-Port 10-Gigabit Ethernet SPA Overview
1-Port 10-Gigabit Ethernet SPA Cables and Connectors
The XFP module is an I/O device that provide a hot-swappable optical interface to the 1-Port 10-Gigabit
Ethernet SPA. The following XFP modules are supported:
•
Cisco Multirate 10GBASE-LR and OC-192/STM-64 SR-1 XFP Module for SMF—This multirate
XFP supports both 10GBASE-LR Ethernet applications and OC-192/STM-64 short-reach (SR-1)
POS applications.
•
Cisco Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP Module for SMF—This multirate
XFP supports both 10GBASE-ER Ethernet applications and OC-192/STM-64 intermediate reach
(IR-2) POS applications.
•
Cisco Multirate 10GBASE-ZR and OC-192/STM-64 LR-2 XFP Module for SMF—This multirate
XFP supports both 10GBASE-ZR Ethernet applications and OC-192/STM-64 long-reach long reach
(LR-2) POS applications.
XFP Connections
XFP modules (see
Figure 3-46
) provide one dual LC/PC fiber connector. Only connectors having PC or
UPC connectors are supported. Patch cords with APC connectors are not supported.
Cisco Multirate 10GE XFP modules do not support Digital Optical Monitoring (DOM).
The operating temperature range for the XFP modules is 0 to 70°C (32 to 158°F); storage temperature
range is -40°C to +85°C (-40°F to +185°F).
The maximum power consumption per Cisco XFP module is 3.5W.
See the label on the XFP for technology type and model.
XFP dimensions are:
•
Height 12.5 mm
•
Width 18.35 mm
•
Length 71.1mm
Table 3-25
1-Port 10-Gigabit Ethernet SPA LEDs
LED Label
Color
State
Meaning
Active/Link
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software and the link is up.
Amber
On
Port is enabled by software and the link is down.
STATUS
Off
Off
SPA power is off.
Amber
On
SPA power is on and good, and SPA is being configured.
Green
On
SPA is ready and operational.