Cisco 7600-SIP-400 - SPA Interface Processor 400, Hardware Installation Manual, Page: 95 / 172

3-49
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-14
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
4-Port and 8-Port Fast Ethernet SPA Overview
4-Port and 8-Port Fast Ethernet SPA Overview
The following sections describe the 4-Port and 8-Port Fast Ethernet SPA:
•
4-Port and 8-Port Fast Ethernet SPA LEDs, page 3-49
• Cables, Connectors, and Pinouts, page 3-50
4-Port and 8-Port Fast Ethernet SPA LEDs
The 4-Port and 8-Port Fast Ethernet SPA has two types of LEDs. There is a Port Number LED for each
individual port and one Status LED. The 8-Port FastEthernet SPA is shown in
Figure 3-41 .
Figure 3-41 8-Port FastEthernet SPA Faceplate
The 8-Port FastEthernet SPA LEDs are described in Table 3-23 .
1
Long length RPR mate cable for single port
RPR SPAs (CBL-RPR-OC192-L)
2
Short length RPR mate cable for single port
RPR SPAs (CAB-RPR-OC192-S)
1
Active/Link LED
2
STATUS LED
138712
ST
ATUS
A/L
SP
A-8X1FE-TX-V2
0 A/L 1 A/L 2 A/L 3 A/L 4 A/L 5 A/L 6 A/L 7
1 2
Table 3-23 8-Port FastEthernet SPA LEDs
LED Label Color State Meaning
Port Number
Active/Link
(0, 1, 2, 3, 4, 5, 6
or 7)
1
1. In this case, port number refers to the numbered LEDs on the 8-Port FastEthernet SPA (0, 1, 2, 3, 4, 5, 6 or 7). Each LED
number on the 8-Port FastEthernet SPA references a port on the SPA.
Green On The port is enabled and the link is up.
Amber On The port is enabled and the link is down.
Off Off The port is disabled.
STATUS Green On The SPA is online.
Amber On The SPA is receiving power and bootstrapping.
Off Off The SPA is offline and deactivated.