13
Mounting on a Suspended Ceiling
If you need to mount your small cell on a suspended ceiling,
follow these steps:
Step 1
Place your small cell on a clean, flat surface with the
bottom side facing you.
Step 2
Take two screws from the accessory kit and screw them
into each of the two corresponding holes on the bottom
of the small cell.
Step 3
Attach the suspended ceiling bracket to the ceiling rail
system using the two “L” brackets included in the
accessory pack and eight screws.
Step 4
Place the small cell such that the attached mounting
screws fit into the suspended ceiling bracket keyhole
mounting slots.
Step 5
Slide the small cell onto the mounting bracket until it
clicks into place.
Summary of Contents for 7330
Page 1: ...QUICK START GUIDE Cisco Universal Small Cell 7330 ...
Page 12: ...12 Figure 3 Cisco USC 7330 Mounted Vertically on Wall 380785 ...
Page 14: ...14 Figure 4 Cisco USC 7330 with Suspended Ceiling Bracket 381277 ...
Page 18: ...18 Figure 7 Cisco USC 7330 with Padlock Attached 1 Padlock 361436 1 ...
