Cisco 6823, Administration Manual, Page: 79 / 194

Procedure
Press and hold the Reset button for 6 seconds.
What to do next
• Set Up a Handset Automatically with the Username and Password, on page 44
• Set Up a Handset Automatically with a Short Activation Code, on page 45
Add a Second Line to a Handset
You can add another line to a handset.
Procedure
Step 1 Click Extensions .
Step 2 Identify the index number in the left column for the handset.
Step 3
Click Add extension .
Step 4 Set the
Line name
.
Give the line a different name from other lines to avoid confusion.
Step 5 In the Terminal field, select the handset for the second extension.
For example, if you are adding the line to the handset with index 2 from step 2, then select Terminal Idx 2 .
Step 6 Set the Extension field to the telephone number assigned to the user.
Step 7
Set the Authentication User Name field to the user ID assigned to the user.
Step 8 Set the
Authentication Password
field to the user's assigned password..
Step 9 Set the Display Name field to the name you want to be displayed on the handset screen.
Step 10
Set the Server field to the Server Alias you configured when you added the base station.
Step 11
Configure the remaining extension fields, as described in Add or Edit Extension Web Page Fields, on page
87 .
Step 12 Click Save .
Step 13 In the Extensions page, check the associated VoIP Idx box.
Step 14
Click Start SIP Registration(s) .
Step 15 Turn the handset off, then back on again.
Step 16 Start to enter a number in the handset, and press Line .
Step 17
Verify that the new extension is listed.
What to do next
If this extension is to be shared, see Share a Line Between Handsets, on page 72
Cisco IP DECT 6800 Series Administration Guide
71
Phone Administration
Add a Second Line to a Handset