XSI Phone Service
Description
Parameter
Enter the name of the server; for example,
xsi.iop1.broadworks.net.
XSI Host Server uses http protocol by
default. To enable XSI over HTTPS, you
can specify
https://
in the server.
Note
Default: Blank
XSI Host Server
Determines the XSI authentication type. Select
Login
Credentials
to authenticate access with XSI id and
password. Select
SIP Credentials
to authenticate
access with the register user ID and password of the
SIP account registered on the phone.
Default: Login Credentials
XSI Authentication Type
BroadSoft User ID of the phone user; for example,
[email protected].
Enter SIP Auth ID when you select
Login Credentials
or
SIP Credentials
for XSI authentication type.
When you choose SIP Auth ID as
SIP Credentials
,
you must enter Login User ID. Without Login User
ID, the BroadSoft directory will not appear under the
phone Directory list.
Default: Blank
Login User ID
Alphanumeric password associated with the User ID.
Enter login password, when you select
Login
Credentials
for XSI authentication type.
Default: Blank
Login Password
The registered user ID of the SIP account registered
on the phone.
Enter SIP Auth ID when you select
SIP Credentials
for XSI authentication type.
SIP Auth ID
The password of the SIP account registered on the
phone.
Enter SIP password when you select
SIP Credentials
for XSI authentication type.
SIP Password
Enables BroadSoft directory for the phone user. Select
Yes
to enable the directory and select
No
to disable
it.
Default: No
Directory Enable
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
268
Phone Troubleshooting
XSI Phone Service
