Step 3
Click
Submit All Changes
.
Assign a Ringtone to an Extension
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page 92
Procedure
Step 1
Select
Voice
>
Ext(n)
, where
(n)
is the number of an extension.
Step 2
Under
Call Feature Settings
, use the
Default Ring (n)
drop-down list box to specify one of the following:
• No Ring
• Choose one of the available 12 ringtones.
Step 3
Click
Submit All Changes
.
Configure the Audio Settings
The user can modify volume settings by pressing the volume control button on the phone, then pressing the
Save
softkey.
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page 92
Procedure
Step 1
Select
Voice
>
User
.
Step 2
In the
Audio Volume
section, configure a volume level of 1 (quiet) through 10 (loudest):
•
Ringer Volume
—Sets the ringer volume.
•
Speaker Volume
—Sets the volume for the full-duplex speakerphone.
•
Headset Volume
—Sets the headset volume.
•
Handset Volume
—Sets the handset volume.
Only the Cisco IP Phone 6851 Multiplatform Phones support the Electronic Hookswitch feature.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
137
Phone Administration
Assign a Ringtone to an Extension
