2-19
Cisco 6160 Hardware Installation Guide
OL-2190-02 B0
Chapter 2 Preparing for Installation
Verifying Contents
Step 5
Carefully open the additional boxes and remove the packing material.
Step 6
Open the accessory kits and boxes that contain the cables, documentation, and management software.
Do not use a knife to open these boxes.
2.5 Verifying Contents
To verify that all equipment, cables, documentation, and other items are received, compare the packing
list to your shipment and to your order. If any items are missing or you need additional information,
contact the Cisco Technical Assistance Center (TAC) at
•
800 553-2447
•
408 526-7209
•
2.6 Inspecting for Damage
After you verify that all of the equipment is included, carefully examine the assemblies, cards, and
cables for any damage resulting from shipping. If you suspect any damage from shipping, contact your
local freight carrier for procedures on damage claims.
If you observe any physical defects in the items you ordered, obtain standard warranty service by
delivering the defective part, accompanied by a copy of the dated proof-of-purchase, to the
Cisco Systems Corporate Service Center or an Authorized Cisco Systems Service Center during the
applicable warranty period. Contact the Cisco TAC for the location of your nearest service center.
See the back of the title page for the Cisco Systems warranty information for hardware and
software products.