Cisco Single-Port Antenna Stand for Multiband TNC Male-Terminated Portable Antenna (Cisco 3G-AE015-R)
Technical Specifications
5
Book Title
Technical Specifications
The following table lists the technical specifications for the Cisco 3G-AE015-R antenna.
System Requirements
The Cisco 3G-AE015-R antenna base is a remote antenna solution for the Cisco 3G wireless WAN
HWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for
this product. It requires an antenna that uses a TNC (male) connector.
For proper use of the antenna base in conjunction with the Cisco 3G-ANTM-1919D antenna, see the
Cisco Multiband Swivel Mount Dipole Antenna (3G-ANTM1919D)
document.
Installation Notes
Table 1
lists the Cisco antennas that are supported for use with the antenna extension base.
Warning
This equipment must be connected to an indoor antenna only.
Statement 373
Product type
Single-port antenna base
Operating frequency range
6 GHz
Attenuation
<3 dB at or below 2.5 GHz
Antenna base connector
TNC female
Pigtail connector
TNC male
VSWR
1
1.
VSWR = voltage standing -wave radio
<2.0
Maximum input power
25 Watts
Base material
Cisco grey UL94 V0 PC/ABS plastic
Cable
15 ft (4.6 m)
Environment
Indoor only
Table 1
Cisco Antennas Supported on the 3G Wireless HWIC
Cisco Part Number Antenna Type
Maximum Gain and
Frequency Range
Description
3G-ANTM1919D
Dipole
Omnidirectional
0 dBi
(806–960 MHz)
0 dBi
(1710–2170 MHz)
This is the default antenna. Multiband faceplate-mounted
dipole antenna. This antenna is included with all
faceplate-mounted 3G wireless WAN HWICs. For more
information, see the
Cisco Multiband- Swivel Mount Dipole
Antenna (3G-ANTM1919D)
document.
