manualshive.com logo in svg

Cisco 3750 - Catalyst EMI Switch, Command Reference Manual

Share
Download
Cisco 3750 - Catalyst EMI Switch Command Reference Manual Download Page 80

 

2-50

Catalyst 3750 Switch Command Reference

OL-8552-07

Chapter 2      Catalyst 3750 Switch Cisco IOS Commands

boot auto-copy-sw

boot auto-copy-sw

Use the 

boot auto-copy-sw

 global configuration command from the stack master to enable the automatic 

upgrade (auto-upgrade) process. It automatically upgrades a switch in version-mismatch mode by 
copying the running software image on any stack member or by copying a tar file image in switch stack 
flash memory. Use the 

no

 form of this command to disable the auto-upgrade process.

boot auto-copy-sw

no boot auto-copy-sw

Syntax Description

This command has no arguments or keywords.

Defaults

Enabled.

Command Modes

Global configuration

Command History

Usage Guidelines

A switch in version-mismatch mode is a switch that has a different minor version number than the 
version on the stack. A switch in version-mismatch mode cannot join the stack as a fully functioning 
member. If the stack has an image that can be copied to a switch in version-mismatch mode, the 
auto-upgrade process automatically copies the image from a stack member to the switch in 
version-mismatch mode. The switch then exits version-mismatch mode, reboots, and joins the stack as 
a fully functioning member.

The auto-upgrade process affects only switches in version-mismatch mode. It does not affect existing 
stack members.

Related Commands

Release

Modification

12.1(11)AX

This command was introduced.

Command

Description

show boot

Displays the settings of the boot environment variables.

show version

Displays version information for the hardware and firmware.

Summary of Contents for 3750 - Catalyst EMI Switch



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands