2-678
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show mvr interface
show mvr interface
Use the
show mvr interface
privileged EXEC command without keywords to display the Multicast
VLAN Registration (MVR) receiver and source ports. Use the command with keywords to display MVR
parameters for a specific receiver port.
show mvr interface
[
interface-id
[
members
[
vlan
vlan-id
]]] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
If the entered port identification is a non-MVR port or a source port, the command returns an error
message. For receiver ports, it displays the port type, per port status, and Immediate-Leave setting.
If you enter the
members
keyword, all MVR group members on the interface appear. If you enter a
VLAN ID, all MVR group members in the VLAN appear.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mvr interface
command:
Switch#
show mvr interface
Port Type Status Immediate Leave
---- ---- ------- ---------------
Gi1/0/1 SOURCE ACTIVE/UP DISABLED
Gi1/0/2 RECEIVER ACTIVE/DOWN DISABLED
interface-id
(Optional) Display MVR type, status, and Immediate Leave setting for the
interface.
Valid interfaces include physical ports (including type, stack member,
module, and port number.
members
(Optional) Display all MVR groups to which the specified interface belongs.
vlan
vlan-id
(Optional) Display all MVR group members on this VLAN. The range is 1
to 4094.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.1(11)AX
This command was introduced.
