2-495
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show auto qos
show auto qos
Use the
show auto qos
user EXEC command
to display the quality of service (QoS) commands entered
on the interfaces on which automatic QoS (auto-QoS) is enabled.
show auto qos
[
interface
[
interface-id
]]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
The
show auto qos
command output shows only the auto-QoS command entered on each interface. The
show auto qos interface
interface-id
command output shows the auto-QoS command entered on a
specific interface.
Use the
show running-config
privileged EXEC command to display the auto-QoS configuration and the
user modifications.
The
show auto qos
command output also shows the service policy information for the Cisco IP phone.
To display information about the QoS configuration that might be affected by auto-QoS, use one of these
commands:
•
show mls qos
•
show mls qos maps cos-dscp
•
show mls qos interface
[
interface-id
] [
buffers
|
queueing
]
•
show mls qos maps
[
cos-dscp
|
cos-input-q
|
cos-output-q
|
dscp-cos
|
dscp-input-q
|
dscp-output-q
]
•
show mls qos input-queue
•
show running-config
Examples
This is an example of output from the
show auto qos
command after the
auto qos voip cisco-phone
and
the
auto qos voip cisco-softphone
interface configuration commands are entered:
Switch>
show auto qos
GigabitEthernet2/0/4
auto qos voip cisco-softphone
interface
[
interface-id
]
(Optional) Display auto-QoS information for the specified port or
for all ports. Valid interfaces include physical ports.
Release
Modification
12.1(14)EA1
This command was introduced.
12.2(20)SE
The information in the command output changed, and the user guidelines
were updated.
12.2(40)SE
The information in the command output changed.
