![Cisco 350XG series Administration Manual Download Page 537](http://html.mh-extra.com/html/cisco/350xg-series/350xg-series_administration-manual_67491537.webp)
Security: IPv6 First Hop Security
Configuring IPv6 First Hop Security through Web GUI
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
518
24
•
Attach Policy to Interface
page where you can attach this policy to a port.
RA Guard Settings
Use the RA Guard Settings page to enable the RA Guard feature on a specified
group of VLANs and to set the global configuration values for this feature. If
required, a policy can be added or the system-defined default RA Guard policies
can be configured in this page.
To configure RA Guard:
STEP 1
Click
Security
>
IPv6 First Hop Security
>
RA Guard Settings
.
STEP 2
Enter the following global configuration field:
•
RA Guard VLAN List
—Enter one or more VLANs on which RA Guard is
enabled.
The other configuration fields are described below.
STEP 3
To add a policy, click
Add
and enter the fields:
•
Policy Name
—Enter a user-defined policy name.
•
Device Role
—Displays one of the following options to specify the role of the
device attached to the port for RA Guard.
-
Inherited
—Device role is inherited from either the VLAN or system
default (client).
-
Host
—Device role is host.
-
Router
—Device role is router.
•
Managed Configuration Flag
—This field specifies verification of the
advertised Managed Address Configuration flag within an IPv6 RA Guard
policy.
-
Inherited
—Feature is inherited from either the VLAN or system default
(client).
-
No Verification
—Disables verification of the advertised Managed
Address Configuration flag.