Cisco 350XG series, Administration Manual

Page: 534 / 625

Security: IPv6 First Hop Security
Default Settings and Configuration
Cisco 350XG & 550XG Series 10G Stackable Managed Switches 515
24
STEP 4
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Neighbor Binding Work Flow
STEP 1
In the Neighbor Binding Settings page, enter the list of VLANs on which this
feature is enabled.
STEP 2
In this same page, set the global configuration values that are used if no values are
set in a policy.
STEP 3
If required, either configure a user-defined policy or add rules the default policies
for the feature.
STEP 4
Add any manual entries required in the Neighbor Binding Table page
STEP 5
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
IPv6 Source Guard Work Flow
STEP 1
In the IPv6 Source Guard Settings page, enter the list of VLANs on which this
feature is enabled.
STEP 2
If required, either configure a user-defined policy or add rules to the default
policies for the feature.
STEP 3
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Default Settings and Configuration
If IPv6 First Hop Security is enabled on a VLAN, the switch traps the following
messages by default:
• Router Advertisement (RA) messages