IP Configuration: RIPv2
Access Lists
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
378
17
Access List Settings
To set the global configuration of an access list.
STEP 1
Click
IP Configuration
>
IPv4 Management and Interfaces > Access List
>
Access List Settings
.
STEP 2
To add a new Access List, click
Add
to open the Add Access List page and enter
the following fields:
•
Name
—Define a name for the access list.
•
Source IPv4 Address
—Enter the source IPv4 address. The following
options are available:
-
Any
—All IP addresses are included.
-
User Defined
—Enter an IP address.
•
Source IPv4 Mask
—Enter the source IPv4 address mask type and value.
The following options are available:
-
Network Mask
—Enter the network mask.
-
Prefix Length
—Enter the prefix length.
•
Action
—Select an action for the access list. The following options are
available:
-
Permit
—Permit entry of packets from the IP address(es) in the access
list.
-
Deny
—Reject entry of packets from the IP address(es) in the access list.
STEP 3
Click
Apply
. The settings are written to the Running Configuration file.
Source IPv4 Access List
To populate an access list with IP addresses.
STEP 1
Click
IP Configuration
> >
IPv4 Management and Interfaces > Access List
>
Source IPv4 Address List
.
STEP 2
To modify the parameters of an access list, click
Add
and modify any of the
following fields:
