Administration: Discovery
CDP Statistics
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
157
9
This page contains the following fields about the neighbor:
•
Device ID
—Identifier of the neighboring device ID.
•
System Name
—Name of the neighboring device ID.
•
Local Interface—Interface number of port through which frame arrived.
•
Advertisement Version—Version of CDP.
•
Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.
•
Capabilities—Primary functions of the device. The capabilities are indicated
by two octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP,
Router, Telephone, DOCSIS cable device, and station respectively. Bits 8
through 15 are reserved.
•
Platform
—Identifier of the neighbors platform.
•
Neighbor Interface—Interface number of the neighbor through which frame
arrived.
•
Native VLAN—Neighbors native VLAN.
•
Application—Name of application running on the neighbor.
•
Duplex—Whether neighbors interface is half or full duplex.
•
Addresses—Neighbors addresses.
•
Power Drawn—Amount of power consumed by neighbor on the interface.
•
Version—Neighbors software version.
NOTE
Clicking on the Clear Table button disconnect all connected devices if from CDP,
and if Auto Smartport is enabled change all port types to default.
CDP Statistics
The CDP Statistics page
displays information regarding CDP frames that were
sent or received from a port. CDP packets are received from devices attached to
the switches interfaces, and are used for the Smartport feature. See
for more information.
