Administration: Discovery
Configuring LLDP
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
138
9
-
Chassis ID
—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the device appears.
-
System Name
—Name of device.
-
System Description
—Description of the device (in alpha-numeric
format).
-
Supported System Capabilities
—Primary functions of the device, such
as Bridge, WLAN AP, or Router.
-
Enabled System Capabilities
—Primary enabled function(s) of the
device.
-
Port ID Subtype
—Type of the port identifier that is shown.
•
LLDP Port Status Table
•
LLDP Port Status Table
-
Interface
—Port identifier.
-
LLDP Status
—LLDP publishing option.
-
LLDP MED Status
—Enabled or disabled.
-
Local PoE ((Power Type, Power Source, Power Priority, Power
Value)
—Local PoE information advertised.
-
Remote PoE (Power Type, Power Source, Power Priority, Power
Value)
—PoE information advertised by the neighbor.
-
# of neighbors
—Number of neighbors discovered.
-
Neighbor Capability of 1st Device
—Displays the primary functions of
the neighbor; for example: Bridge or Router.
LLDP Local Information
To view the LLDP local port status advertised on a port:
STEP 1
Click
Administration
>
Discovery - LLDP
>
LLDP Local Information
.
STEP 2
Select the interface for which LLDP local information is to be displayed.
