5-14
Cisco 3310 Mobility Services Engine Getting Started Guide
OL-17304-02
Chapter 5 Initial Configuration
Manually Stopping Mobility Services Engine Software
If the mobility services engine is not running, the command output looks like this example:
com.aes.common.util.AesException: Failed to connect to server: http://localhost:8001
at com.aes.client.AesClient.connect(AesClient.java:218)
at com.aes.location.test.AesAbstractTest.init(AesAbstractTest.java:181)
at
com.aes.location.test.admin.AesTestGetServerInfo.main(AesTestGetServerInfo.java:75)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
#
Manually Stopping Mobility Services Engine Software
The mobility services engine software automatically runs after initial configuration and after each
reboot.
Follow these steps to manually stop and restart the software:
Step 1
To stop the software, enter etc/init.d/msed stop.
Step 2
To verify status, enter etc/init.d/msed status.
Step 3
To start the software, enter etc/init.d/msed start.
Updating Mobility Services Engine Software
You can update the mobility services engine using the Cisco WCS or manually download the software
using a console port connected to the mobility services engine.
Note
For the latest Cisco WCS and mobility services engine compatibility and installation notes for a given
release, refer to the appropriate release note at the following link:
http://www.cisco.com/en/US/products/ps9742/tsd_products_support_series_home.html
Before downloading and updating software on the mobility services engine, note the following:
•
The mobility services engine (server) image is compressed. The software image automatically
decompresses while downloading from the Cisco WCS.
•
Approximately 5 minutes are required for the newly loaded mobility services engine software
version to appear on the Cisco WCS Mobility > Mobility Service Engines window.
Note
The Cisco WCS queries for mobility services engine connectivity and database updates every 5 minutes
by default.
