9-17
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 9 Managing Controller Software and Configurations
Transferring Files to and from a Controller
Figure 9-3
Download File to Controller Page
Step 3
From the File Type drop-down box, choose
Vendor CA Certificate
.
Step 4
From the Transfer Mode drop-down box, choose
TFTP
or
FTP
.
Step 5
In the IP Address field, enter the IP address of the TFTP or FTP server.
Step 6
If you are using a TFTP server, the default values of 10 retries and 6 seconds for the Maximum Retries
and Timeout fields should work correctly without any adjustment. However, you can change these
values. To do so, enter the maximum number of times that the TFTP server attempts to download the
certificate in the Maximum Retries field and the amount of time (in seconds) that the TFTP server
attempts to download the certificate in the Timeout field.
Step 7
In the File Path field, enter the directory path of the certificate.
Step 8
In the File Name field, enter the name of the certificate.
Step 9
If you are using an FTP server, follow these steps:
a.
In the Server Login Username field, enter the username to log into the FTP server.
b.
In the Server Login Password field, enter the password to log into the FTP server.
c.
In the Server Port Number field, enter the port number on the FTP server through which the
download occurs. The default value is 21.
Step 10
Click
Download
to download the CA certificate to the controller. A message appears indicating the
status of the download.
Step 11
After the download is complete, click
Commands
>
Reboot
>
Reboot
.
Step 12
If prompted to save your changes, click
Save and Reboot
.
Step 13
Click
OK
to confirm your decision to reboot the controller.
Using the CLI to Download CA Certificates
Follow these steps to download a CA certificate to the controller using the controller CLI.
Step 1
Log into the controller CLI.
Step 2
Enter
transfer download mode
{
tftp
|
ftp
}.
Step 3
Enter
transfer download datatype eapcacert
.
