4-63
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 4 Configuring Controller SettingsWireless Device Access
Configuring Voice and Video Parameters
Step 11
To configure the number of aggregated voice WMM traffic specification (TSPEC) streams at a specified
data rate for the 802.11a or 802.11b/g network, enter this command:
config
{
802.11a
|
802.11b
}
cac voice stream-size
number
max-streams
mean_datarate
The
number
range is 1 to 5 voice streams, and the default value is 2. The
mean_datarate
range is 84 to
91.2 Kbps, and the default value is 84 Kbps.
Step 12
To enable or disable expedited bandwidth requests for the 802.11a or 802.11b/g network, enter this
command:
config
{
802.11a
|
802.11b
}
exp-bwreq
{
enable
|
disable
}
Step 13
To enable or disable TSM for the 802.11a or 802.11b/g network, enter this command:
config
{
802.11a
|
802.11b
}
tsm
{
enable
|
disable
}
Step 14
To re-enable all WLANs with WMM enabled, enter this command:
config wlan enable
wlan_id
Step 15
To re-enable the radio network, enter this command:
config
{
802.11a
|
802.11b
}
enable
network
Step 16
To save your settings, enter this command:
save config
Using the CLI to Configure Video Parameters
Follow these steps to configure video parameters using the CLI.
Step 1
To see all of the WLANs configured on the controller, enter this command:
show wlan summary
Step 2
To make sure that the WLAN you are planning to modify is configured for WMM and the QoS level is
set to Gold, enter this command:
show wlan
wlan_id
Step 3
To disable all WLANs with WMM enabled prior to changing the video parameters, enter this command:
config wlan disable
wlan_id
Step 4
To disable the radio network, enter this command:
config
{
802.11a
|
802.11b
}
disable
network
Step 5
To save your settings, enter this command:
save config
Step 6
To enable or disable video CAC for the 802.11a or 802.11b/g network, enter this command:
config
{
802.11a
|
802.11b
}
cac video acm
{
enable
|
disable
}