141
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Security Features
Configuring VPN
Configure the IPSec Crypto Method and Parameters
A dynamic crypto map policy processes negotiation requests for new security associations from remote
IPSec peers, even if the router does not know all the crypto map parameters (for example, IP address).
To
configure the IPSec crypto method
,
follow these steps
,
beginning in global configuration mode
.
SUMMARY STEPS
1.
crypto dynamic-map
dynamic-map-name dynamic-seq-num
2.
set transform-set
transform-set-name
[
transform-set-name2...transform-set-name6
]
3.
reverse-route
4.
exit
5.
crypto map
map-name seq-num
[ipsec-isakmp] [dynamic
dynamic-map-name
] [discover]
[profile
profile-name
]
DETAILED STEPS
Command or Action
Purpose
Step 1
crypto dynamic-map
dynamic-map-name
dynamic-seq-num
Example:
Router(config)# crypto dynamic-map dynmap 1
Router(config-crypto-map)#
Creates a dynamic crypto map entry and enters
crypto map configuration mode.
See
Cisco IOS Security Command Reference
for
more detail about this command.
Step 2
set transform-set
transform-set-name
[
transform-set-name2...transform-set-name6
]
Example:
Router(config-crypto-map)# set
transform-set vpn1
Router(config-crypto-map)#
Specifies which transform sets can be used with
the crypto map entry.
Step 3
reverse-route
Example:
Router(config-crypto-map)# reverse-route
Router(config-crypto-map)#
Creates source proxy information for the crypto
map entry.
See
Cisco IOS Security Command Reference
for
details.
