5-6
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 5 Power-Up and Initial Configuration Procedures
Configuring the Router
A summary of the available interfaces appears.
Current interface summary
Any interface listed with OK? value "NO" does not have a valid configuration
Interface IP-Address OK? Method Status Protocol
Async1 unassigned YES unset down down
FastEthernet0 unassigned NO unset up up
FastEthernet1 unassigned NO unset up down
FastEthernet2 unassigned NO unset initializing down
FastEthernet3 unassigned NO unset initializing down
FastEthernet4 unassigned NO unset initializing down
FastEthernet5 unassigned NO unset initializing down
FastEthernet6 unassigned NO unset initializing down
FastEthernet7 unassigned NO unset initializing down
FastEthernet8 unassigned NO unset initializing down
FastEthernet9 unassigned NO unset initializing down
Vlan1 unassigned YES unset up down
Step 8
Choose one of the available interfaces for connecting the router to the management network:
Enter interface name used to connect to the
management network from the above interface summary:
fastethernet0
Step 9
Respond to the following prompts as appropriate for your network:
Configuring interface FastEthernet0:
Use the 100 Base-TX (RJ-45) connector? [yes]:
yes
Operate in full-duplex mode? [no]:
no
Configure IP on this interface? [yes]:
yes
IP address for this interface:
172.16.2.3
Subnet mask for this interface [255.255.0.0] :
255.255.0.0
Class B network is 172.16.0.0, 16 subnet bits; mask is /16
Step 10
The configuration is displayed:
The following configuration command script was created:
hostname Router
enable secret 5 $1$AaVU$9tl.HLXo/M1oYglcLDVIN1
enable password 654321
line vty 0 4
password 123456
snmp-server community public
!
no ip routing
!
interface FastEthernet0
no shutdown
media-type 100BaseX
full-duplex
ip address 172.16.2.3 255.255.0.0
!
interface FastEthernet1
shutdown
no ip address
!
interface FastEthernet2
shutdown
no ip address
!
interface FastEthernet3