1-5
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Chapter 1 Overview
Hardware Models
Table 1-1
1552 Access Point Model Numbers and Descriptions
Model (or part number)
Configuration
AIR-CAP1552H
-x-
K9
Two-radio (2.4 GHz and 5 GHz) Hazardous Location (Haz
Loc) version. This AP supports 3 external dual-band
omnidirectional antennas. The antennas can be ordered
with the model. An optional Small Form Factor Pluggable
(SFP) fiber module can be ordered with the AP. The AP has
the capability to receive and use an SFP fiber module.
Countries (regulatory domains) represented by the variable
x
are described at:
For specific regulatory domains supported by this model,
refer to the product data sheet at:
AIR-CAP1552SA-x-K9 and
AIR-CAP1552SD-x-K9
Two-radio (2.4 GHz and 5 GHz) modular version. This
model supports three (3) external dual-band
omnidirectional antennas. The antennas can be ordered
with the model. This model also supports two ISA100
Wireless and WirelessHART Multiprotocol radios with 2
additional external omnidirectional antennas for
connections to 802.15.4 sensor network transceivers.
Countries (regulatory domains) represented by the variable
x
are described at:
SA models support AC power input, and SD models require
DC power.
For specific regulatory domains supported by this model,
refer to the product data sheet at:
AIR-CAP1552WU-x-K9
Two-radio (2.4 GHz and 5 GHz) modular version. This
model supports six (6) external Wi-Fi antennas (Three 2.4
GHz and Three 5 GHz). This model also supports a
WirelessHART radio for connections to 802.15.4 sensor
network transceivers via a cable-attached 2.4 GHz antenna.
Countries (regulatory domains) represented by the variable
x
are described at:
For specific regulatory domains supported by this model,
refer to the product data sheet at:
