B-5
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Appendix B Declarations of Conformity and Regulatory Information
Industry Canada
Caution
To meet regulatory restrictions, the access point must be professionally installed.
Industry Canada
Models:
IC Certification Number:
Canadian Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du
Canada.
This device complies with Class B Limits of Industry Canada. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired
operation.
Cisco Aironet Access Points are certified to the requirements of RSS-210. The use of this device in a
system operating either partially or completely outdoors may require the user to obtain a license for the
system according to the Canadian regulations. For further information, contact your local Industry
Canada office.
The 1552H device has been designed to operate with antennas having a maximum gain of 4 dBi for 2.4
GHz and 7 dBi for 5 GHz. Antennas having a gain greater are strictly prohibited for use with this device.
The required antenna impedance is 50 ohms.
The 1552SA/1552SD device has been designed to operate with antennas having a maximum gain of 4
dBi for 802.11 and 14 dBi for the sensor (802.15.4) radio in the 2.4 GHz band and 7 dBi in the 5 GHz
band. Antennas having a gain greater are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than necessary for successful
communication.
Declaration of Conformity for RF Exposure
This access point product has been found to be compliant to the requirements set forth in CFR 47
Section 1.1307 addressing RF Exposure from radio frequency devices as defined in Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.T he
antennas should be positioned more than 7.9 in (20 cm) from the body of all persons.
AIR-CAP1552SA/SD-A-K9 2461B-102074P
AIR-CAP1552H-A-K9
AIR-CAP1552WU-x-K9
