VCC-F32FV19CL
Rev.900-586-31-00
6.3. Internal Adjustment Switches and Potentiometer Information
VCC-F32 Internal switch
©2009 CIS Corporation. All rights reserved.
16
SW104
1
CN
1
SW100
(WHITE BALANCE)
SW 101
(GAIN)
1
2
ON
RV101
(R - GAIN)
(Position B)
(Position C)
(Position A)
(Position B )
(Position C )
(Position A)
RV102
(B - GAIN )
(1) Gain selection
SW101:
Position A: 0dB (Initial Setting)
Position B: 6dB
Position C: Manual (0dB
~
+12dB)
In Manual mode, Gain is adjusted with gain potentiometer.
(2) White Balance setting SW100:
Position A: 3200K (Initial Setting)
Position B: 5600K
Position C: Manual
In Manual mode, R and B gain are adjusted with RV101 and
RV102.
(3) R-Gain
RV101:
Potentiometer for R Gain adjustment
(4) B-Gain
RV102:
Potentiometer for B Gain adjustment
(5) SW104-1
Not used (Must be fixed to OFF)
SW104-2
To save remote settings (EEPROM Hardware Protect)
OFF:
Data set by remote communication control cannot be saved.
(Rebooting the camera power undo the settings.)
ON:
Data set by remote communication control can be saved.