CIS—CRS354
-
48P
Welcome
Thank you for choosing CIS! This quick setup guide will assist you with getting your CIS switch up and
running. For more detailed configuration, please check the user manuals located on our website. If you
have any questions, please do not hesitate to contact our support team.
The CIS
-
CRS354
-
54P switch is equipped with 48 Gigabit Ethernet ports (with Auto MDI/X), 4 SFP+ ports, 2
QSFP+ ports, and an RJ45 serial port that is disabled by default. The top LEDs will show green when using
low voltage PoE, and red when using high voltage PoE.
Powering the Switch
Connect the included IEC power cable to the rear of the switch.
Connect your router or upstream switch to any of the Ethernet ports, or use an SFP or SFP+ connection if
your device supports it. Connect your devices to the remaining ports
Switch Setup
Router or Switch
Computers/Devices
Routers/Switches
with SFP Ports
