23
IP Scan
The IP scan tool locates devices on the network. It can also locate devices that have a static IP set
internally if they are on the same network as the switch.
To use the IP scan tool, select the network you wish to scan on (bridge-operations is default), then enter
the network address and subnet mask using CIDR notation.
Select
bridge-operations
and enter
10.100.1.0/24
as the address range. You may have multiple interfaces
and address ranges depending on your configuration. Most use a /24 network size.
Summary of Contents for CRS326-24G
Page 1: ...CIS CRS326 24G User Manual...
