Environmental Noise Measurement Kit User Manual
Page 17
Connect the Optimus Sound Level Meter to NoiseTools using a USB cable
Open the NoiseTools software and connect the Optimus Sound Level Meter via a USB cable.
When the connection is made, the instrument will appear in the Instruments window as shown below:
Enable remote communications for the instrument
Click the world icon to open the remote instruments options:
In the options box that opens, click the “Allow Remote Access” and “Link to Optimus Cloud” for the Optimus
Sound Level Meter that is connected via USB. NoiseTools will save this information when the OK button is
clicked.
Configure the Optimus Sound Level Meter for use with the modem
In the NoiseTools software, click on ‘Configure’, then on the ‘Advanced’ tab as below:
