S
ECTION
8: H
ANDLING
AND
S
ERVICING
C
IRRUS
D
ESIGN
C
LEANING
I
NTERIOR
S
URFACES
SR20
8-30
P/N 11934-005
Instrument Panel and Electronic Display Screens
The instrument panel, control knobs, and plastic trim need only to be
wiped clean with a soft, damp cloth. The multifunction display, primary
flight display, and other electronic display screens should be cleaned with
Optimax - LCD Screen Cleaning Solution as follows:
• CAUTION •
To avoid solution dripping onto display and possibly migrating
into component, apply the cleaning solution to cloth first, not
directly to the display screen.
Use only a lens cloth or non-abrasive cotton cloth to clean display
screens. Paper towels, tissue, or camera lens paper may scratch the
display screen.
Clean display screen with power OFF.
To Clean Instrument Panel and Electronic Display Screens
1.
Gently wipe the display with a dry, clean, cotton cloth.
2.
Moisten clean cotton cloth with cleaning solution.
3.
Wipe the soft cotton cloth across the display in one direction, moving
from the top of the display to the bottom. Do not rub harshly.
4.
Gently wipe the display with a dry, clean cotton cloth.
Headliner and Trim Panels
The airplane interior can be cleaned with a mild detergent or soap and
water. Harsh abrasives or alkaline soaps or detergents should be avoided.
Solvents and alcohols may damage or discolor vinyl or urethane parts.
Cover areas where cleaning solution could cause damage.
• CAUTION •
Solvent cleaners and alcohol should not be used on interior parts.
If cleaning solvents are used on cloth, cover areas where cleaning
solvents could cause damage.
To Clean Headliner and Trim Panels
1.
Clean headliner, and side panels, with a stiff bristle brush, and vacuum
where necessary.
2.
Soiled upholstery, may be cleaned with a good upholstery cleaner suit-
able for the material. Carefully follow the manufacturer's instructions.
Avoid soaking or harsh rubbing.
Reissue A
