Cirris Signature 1000HN, User Manual

Page: 25 / 86

Section 4: Learn a Sample Cable, Store it in Memory / What to do if you see an error message
1000HN User’s Guide / page 25
ory Location 1 Is Now Unused
. Keep pressing
Display/Print
until you find
the memory location you want.
Note
: If the display prompts
No Memory
Available
, all of the analyzer’s memory locations are full. You’ll have to delete
a wirelist to make room available. See page 33 for instructions on how to do this.
4. When you have located an available memory position, continue holding the
Memory
button in, and press
Function
to save the newly-learned wirelist to that
memory location. The display will prompt
Memorizing Last Learned Cable
.
5. Release the
Memory
button. The display will prompt Last Learned Now Is In
Location X . The wirelist is now stored in the analyzer’s memory.
What to do if you see
an error message
If you get an error message such as
Learned Cable Resis Error
or
Insulation
Resis < Auto.XXXX
while you’re trying to learn a Sample Cable, check the
following:
1. If the error message is
Learned Cable Resis Error
, the cable may have
resistances that fall between the Connection Resistance and Insulation Resistance
settings.
• Press
Display/Print
to locate points with resistance errors, and docu-
ment them. If the cable is correctly built, change the resistance settings
to accommodate the cable. See page 17 for details on how to do this.
LEARNED CABLE
MEMORIZING LAST
Hold the MEMORY button in while you press here
LAST LEARNED NOW
IS IN LOCATION 1