Circutor WIBEEE Series Instruction Manual Download Page 6

Page: 6 / 50

Wibeee

Instruction Manual

REVISION LOG

Table 1: Revision log�

Date

Revision

Description

01/18

M064B01-03-18A

Initial Version

08/18

M064B01-03-18B

Changes in the following sections:

02/20

M064B01-03-20A

Changes in the following sections:

2.- 3.5. - 5.2.1.1.

Note:

The images of the devices are for illustration purposes only and may differ from the orig-

inal device.

SYMBOLS

Table 2: Symbols�

Symbol

Description

Compliant with the relevant European standards.

Do not remove from hazardous live conductors or place it around them.

Double insulation.

AC current.

Device covered by European directive 2002/96/EC. At the end of its useful

life, do not leave the device in a household waste container. Follow local

regulations on electronic equipment recycling.

Summary of Contents for WIBEEE Series



















































Search results

Summary of Contents for WIBEEE Series

Reviews:

Related manuals for WIBEEE Series

Brands by name

Popular brands

Circutor WIBEEE Series, Instruction Manual

Search results

Summary of Contents for WIBEEE Series

Reviews:

Related manuals for WIBEEE Series

Brands by name

Popular brands