28
RGU-10 MT
Instruction Manual
When the desired value is shown on the screen, validate the number by pressing the
PROG
key.
Programming values:
2�4
(2400 bauds)
, 4�8
(4800 bauds)
,
9�6
(9600 bauds)
,
19�2
(19200 bauds)
,
38�4
(38400 bauds)
, 5
4�6
(54600 bauds)
and
115
(115000 bauds)
.
6�1�3�- PARITY
To change the parity, press the
td
key repeatedly.
When the desired value is shown on the screen, validate the number by pressing the
PROG
key.
6�2�- MEASUREMENT CONFIGURATION
6�2�1�- WORKING FREQUENCY
The display shows
FREC
. To change the value, press the
PROG
key. The currently set frequency value is
shown at the top left of the screen.
To change the working frequency, press the
td
key repeatedly.
When the desired value is shown on the screen, validate the number by pressing the
PROG
key. The
device exits the programming menu, and shows a screen with the
“SAVE”
message.
6�2�2�- LIMIT OF THE SCALES
The display shows
LIM
. To change the value, press the
PROG
key. The screen shows the end values of
2 scales, Trip sensitivity and delay.
Summary of Contents for RGU-10 MT
