26
PV-Monitor-M
Instruction Manual
Monthly energy closure:
You can configure the following parameters in this section:
kWh / Month 1st,
the production and consumption values of the last month are recorded in
this section.
Month closure setp oint,
the production and consumption parameters are set in this sec-
tion.
Objective - Monthly PV production:
The monthly PV energy production targets are set in this section.
Tariff price:
You can configure the following parameters in this section:
Currency,
the currency of the country where the PV energy installation is located.
Energy Price,
the price of energy self-consumed from a renewable source of energy (PV)
in €/kWh.
Tax 1, Tax 2, VAT,
taxes applied to the generation of PV energy.
Ratio of equivalent CO2 emissions:
Sets the ratio of equivalent CO
2
for 1 kWh, according to the energy mix of each country.
6.4.- CONFIGURATION OF ALARMS
To access the configuration of alarms and notifications of alarms sent via e-mail, access the
web site of the
PV-Monitor-M
through port 8082.
From a web browser, by entering this address:
192�168�0�2:8082
(with the computer connected
to the router)
Figure 22:E-mail setup screen�
