14
PV-Monitor-M
Instruction Manual
5.4.-
STEP 4
: CONFIGURATION OF THE ROUTER
Configure the network parameters of the router supplied with the device. To do so:
1�-
Connect an Ethernet cable between the Client router and router of the installation (yellow
RJ45).
2�-
Connect an Ethernet cable between the computer and router of the installation.
3�-
Connect an Ethernet cable between the
PV-Monitor-M
and router of the installation.
4�-
Connect an Ethernet cable between the
CDP-0
and router of the installation.
PV-Monitor-M
CDP-0
Router Customer
Computer
Figure 6: Connections of the router of the installation�
5�-
Access the router of the installation, IP:
192�168�0�1
.
A screen will be displayed, where you must enter the access password:
User:
Admin
,
Password: leave blank,
Note:
Check that the
CDP
and
PV-Monitor-M
are in the same IP range.
6�-
In the main screen of the router,
, select
Advanced network parameters
.
