67
Instruction Manual
line-CVM-D32
Maximum value:
65499 s.
Hold down key
to validate the value.
Use key
to skip to the next programming point.
6�6�6�- ENERGY PER PULSE AND CONTACT STATUS
Note:
Screen visible if the selected digital output variable is an energy, see
This screen enables energy per pulse and contact status configuration.
WEIGHT
1
Wh
NO
CONTACT TYPE
OUT1
SETUP
Hold down key
to set the
energy per pulse
(WEIGHT)�
Use keys
and
to modify the digit's value.
Press key
to skip through the digits.
Energy per pulse:
Minimum value:
1 wh / varLh / varCh / varh / VAh.
Maximum value:
1999999 wh / varLh / varCh / varh / VAh.
Hold down key
to set
contact status
(CONTACT TYPE)
.
Use keys
and
to skip through the different options:
NC,
Contact
normally closed.
NO,
Contact normally open.
Hold down key
to validate the value.
Use key
to skip to the next programming point.
6�6�7�- PULSE
Note:
Screen visible if the selected digital output variable is an energy, see
This screen enables pulse width configuration
