Circutor eHome Series, Installation Manual

Page: 21 / 26

21
Installation Guide
eHome
1 — P O W E R I N P U T
Before proceeding, make sure voltage is present in the terminal blocks.
For Three-Phase models pay special attention to Neutral Cable.
2 — C A R E F U L W I T H T H E W I R E S
Before closing the unit, keep in mind all cables should remain inside.
3 — C H E C K T H E P LU G S
Plugs should be in good conditions before starting the unit.
4 — E L E C T R I C A L P R OT E C T I O N S
If the unit includes electrical protections, rearm all of them.
5 — C H E C K T H E B E AC O N I N D I C ATO R S
All beacon indicators should light properly. Here’s the reference:
6 — O P E R AT I O N
Check no abnormal noise appears while the unit is charging.
7 — P R E V E N T I V E M A I N T E N A N C E
It is recommended to perform one preventive maintenance per year.
Verification
G
P LU G S TAT E
Av a i l a b l e
C h a rg i n g
C h a rg e d
F a u l t
H e a t i n g
B E AC O N C O LO R
G re e n
B l u e ( f l a s h i n g )
B l u e
R e d ( f l a s h i n g )
O ra n g e