29
Instruction Manual
DHC-96 CPM 1500
ALr
, alarm output.
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�4�2�- RELAY PULSE DURATION
The alarm relay can behave in 2 different ways:
1�-
The relay is activated when the alarm is triggered and is deactivated when the alarm is de-
activated.
2�-
The relay is activated when the alarm is triggered and is deactivated after a programmed
period of time, even though the alarm condition has not been cancelled.
This screen is used to configure the programmed time, i.e., the relay pulse duration.
To make the relay operate in mode
no� 1
, program the value to
0
.
tinE
ñ
-
000.0
S
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Minimum configuration value:
000.0 s
Maximum configuration value:
999.9 s
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�4�3�- ALARM PARAMETER
This screen is used to configure the parameter that will be used to activate the alarm.
itEn
ñ
-
U--H
Use the
key to browse the different options:
U--L
, Active alarm when the voltage is less than the alarm value.
i--L
, Active alarm when the current is less than the alarm value.
P--L
, Active alarm when the power is less than the alarm value.
di1L
, Active alarm when digital input 1 is disconnected.
di2L
,
Active alarm when digital input 2 is disconnected.
U--H
, Active alarm when the voltage is higher than the alarm value.
Summary of Contents for DHC-96 CPM
