35
Instruction Manual
CVM-D41 DC
5�4�5�- ALARM VALUE
The display value for voltage, current or power after which the alarm will be activated is configured on
this screen. The value is programmed in absolute values.
uALE
1200
V
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Configuration values
Table 29: Configuration values: Alarm value�
Alarm value
Minimum value
0
Maximum value
9999
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�4�6�- HYSTERESIS
This screen is used to configure the hysteresis value, i.e., the difference between the alarm connection
and disconnection value.
HyS
0005
V
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Configuration values
Table 30: Configuration values: Hysteresis�
Hysteresis
Minimum value
0
Maximum value
9999
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�4�7�- SAVE CONFIGURATION
To save the configuration of the device, follow the steps indicated in section
�
Summary of Contents for CVM-D41 DC
Page 1: ...INSTRUCTION MANUAL Power analyzer CVM D41 DC M337B01 03 22A ...
Page 2: ...2 CVM D41 DC Instruction Manual ...
Page 55: ...55 Instruction Manual CVM D41 DC 10 EU DECLARATION OF CONFORMITY ...
Page 56: ...56 CVM D41 DC Instruction Manual ...
